Shoham's manually operated hand tools can be used for various types of applications. Robustly built, the main shaft is made of chrome plated steel to ensure a lifetime-endurance.
A basic manual unit is offered to purchase individually, or along with a standard or custom made die set.
Die sets can be designed upon request and according to the perforated material. Regularly, a die set consists of a cutter (“male”) and a die (“female”). The “male” device mounts on the vertical main shaft (ram) in one of two possible options:
Configuration No. 1:
The device fits into a hollow inside the ram, secured in place by means of a set screw.
Configuration No. 2:
The device is attached with bolts to a welded plate.
* Throat Depth / Punch Height / Punching Stroke can be chosen according to customer's request. Length stops can be installed according to the desired measured lengths.
Technical Specifications
Press Force Approximated Weight (without die-sets) D: Throat Depth H: Punch Initial Height S: Standard Punching Strokes
Up to 2.5 Tons 10-15 Kg 65 / 100 / 155 / 200 [mm] 120 / 140 / 160 / 180 [mm] 18 / 34 / 60 / 90 [mm]
Use
Use
Used industrially for perforating, shearing, joining or riveting of:
